NOTE: This list includes only recommendations for Android devices to have the best experience with HoloBuilder and also support SpeedMode. There are more supported devices though that you can check here.
The JobWalk app runs on most Android and iOS mobile devices to give you the most flexibility you can have with working with HoloBuilder. However, choosing the right device will improve your experience with HoloBuilder and push your working efficiency.
Download the JobWalk app for Android on your mobile device:
NOTE: If you are using the HoloBuilder EU server solution you will need to download the JobWalk app for EU for Android or iOS.
Recommended Android devices
To have the best possible experience while capturing and make use of all our features (e.g. also supporting ARCore for SpeedMode use), the following Android-based mobile devices are recommended for use:
Pixel 3 XL
Pixel 4 XL
Galaxy Tab S4
Galaxy Tab S6
OnePlus 7 Pro
OnePlus 7T Pro
OnePlus 8 Pro
Note: Also any newer versions of the models listed above can be considered.
Minimum Device Requirements & Best Practices
There are also certain minimum requirements that your device must meet in order for the JobWalk App to work properly.
Mobile devices used for capturing images with the JobWalk app should have large internal storage (ideally >64GB) with at least 15 GB of free storage and 3 GB of RAM - Learn more about the required specs here.
Note: The app will warn you if you are running out of memory. Please do not ignore the warning and free up some storage space. DO NOT delete any project-related data until the project was successfully synced to the cloud but delete other data from your device non-related to the JobWalk app!
We recommend one user per device. Each user must always have their own HoloBuilder account in order to avoid conflicts with project versions.
Free up space locally on the device on a regular basis. We recommend to periodically free up the project area (learn more) or deleting the project and re-downloading the “Project Layout” (learn more) so that only the sheets and locations of images (so-called waypoints) are saved in the device. This will prevent the device’s storage from becoming full.
IMPORTANT: Only clean up your device or delete your project if it was already successfully synced to the cloud! Otherwise, you might lose any unsynced progress.
Note: If you have trouble finding the JobWalk app in the Play Store or installing it, please refer to this article.
What might also interest you: