All Collections
JobWalk App
How to adjust the distance for SpeedMode's ContinuousMode in the JobWalk app
How to adjust the distance for SpeedMode's ContinuousMode in the JobWalk app

Increase or decrease the ContinuousMode's distance to adjust the frequency of your capturing while walking the site.

Anna-Azize Adami avatar
Written by Anna-Azize Adami
Updated over a week ago

When working with SpeedMode's ContinousMode, it is important to have a smooth process. For this, it is possible to adjust the distance of when the 360 images are captured with ContinuousMode activated in the JobWalk App. You can, e.g., set it to a smaller range to have more images captured closely one after the other or reduce the frequency with a wider distance.

If you would like to find out how to set up the SpeedMode's ContinuousMode feature in the JobWalk App, please refer to this Help Center article.

Changing the ContinuousMode capturing distance

  1. Open a project in the JobWalk App and start SpeedMode by tapping the lightning icon on the right-hand side of your screen.

    Note: You might need to do the setup for SpeedMode on the selected sheet first.

  2. Now, tap on the three dots in the upper right corner to open the project options.

  3. Select the menu option Change ContinuousMode Distance.

  4. You can now adjust the distance in feet. Select a distance between 3 feet (~0.3 m) and 15 feet (~4.6 m). A black checkmark indicates the current distance setting.

Adjust the distance for SpeedMode's ContinuousMode for better adjusting the capturing to your site requirements

What might also interest you

Did this answer your question?