Skip to main content
Set up the Bublcam with your JobWalk App

How to connect and use the Bublcam 360° camera with the JobWalk App.

Anna-Azize Adami avatar
Written by Anna-Azize Adami
Updated over a week ago

To get started for setting up your Bublcam, please download the JobWalk app to your mobile Android or iOS device and log in. You can learn more about how to work with the JobWalk app in the dedicated article.

Connecting from within the JobWalk app (recommended process)

Start the JobWalk App and download/update an existing project or create a new project. Add a new floor plan/sheet or select an existing sheet of the project. Tab on the sheet to place the first image. Follow the instructions below or on the app screen for setting up the corresponding camera connection for your Bublcam.

Connecting before starting the JobWalk app

Alternatively, it is also possible to first establish the connection of your mobile device with the camera and open the JobWalk app in a second step. This way you can directly start capturing on your project. Simply follow the steps below for connecting to the Bublcam.
When editing an existing project, please make sure to have your HoloBuilder project downloaded/updated before connecting to the camera.

Set up and connect your Bublcam 360° camera with the JobWalk app

Only when the camera is connected via the internal Wi-Fi Network of the Bublcam camera, you can use your smartphone with the JobWalk App to capture images on-site and place them directly on a sheet.

Bublcam setup

Make sure the camera and phone are fully charged before going on-site to avoid any bad surprises during the job walk creation process.

Bublcam 360° camera setup
  1. Before you start, please make sure a micro SD card is inserted. 

  2. Turn on the Bublcam by pressing and holding the bubl button until the LED begins flashing blue. 

  3. Open the settings app on your mobile device and go to the Wi-Fi settings.

  4. Connect your mobile device to the Bublcam's Wi-Fi network (which begins with  "Bublcam" followed by a series of letters and numbers). The default password is "12345678".

  5. Open the JobWalk app.
    Note: When the phone is connected to the camera, you’ll see a first instructional screen of how to start capturing with theJobWalk app.

Bublcam 360° camera power button

For more information on the JobWalk App and additional compatible cameras, please refer to the following tutorials:

Did this answer your question?