Move Waypoints to a New Position in the Same Area
In the 2D view, you can move the following waypoints to a new position:
This is the generic waypoint icon. You can move such a waypoint if it contains a 360° photo (static HoloBuilder captures, see Capture 360° photos and create tours with the JobWalk App).
Waypoint with a 2D image (without position information).
2D image.
Location marker.
1. Click the icon in the toolbar on the right side.
2. Click and hold the waypoint you want to move.
3. Drag the waypoint to the new position.
4. Click Apply changes in the toolbar at the bottom to save your changes.
Move Waypoints to another Area
In the project structure view, you can move the following types of waypoints to another area of your project.
Waypoint with a 360° photo, i.e. static HoloBuilder captures, see Capture 360° photos and create tours with the JobWalk App.
2D image that was added in the HoloBuilderWebEditor with no assigned position.
Waypoint with a 360° photo and an additional 2D image.
Location marker: These location markers are placeholders for images that should be added to the layer in the JobWalk app. See Capture Tab: 2D View for more information.
Select the waypoint in the 2D view or in the project structure view.
In the project structure view, click the three-dots menu of the waypoint.
Select menu entry Move to different area.
The following form is displayed:
4. Select the area to which you want to move the waypoint.
5. Click Move.
For more information on waypoints, see our Sphere XG User Manual.